Atul offers various speciality systems for water proofing, fibre reinforced plastic (FRP) rebars, clear casting system for table tops and coal tar coating. Features • water proofing - variable pot life and viscosity variants with excellent bonding to concrete surfaces • FRP rebars - light weight, durable, non-corrosive properties with high thermal and excellent mechanical strength • clear casting - exceptionally transparent system for decorative table top applications • coal tar coating - mild to moderate chemical resistance for effluent treatment plant (ETP) and sewerage lines Allied application systems Coal tar Clear casting-table top FRP rebars Water proofing 18 19 Allied application systems Lapox systems Mixing ratio (resin : curing agent) Mixed1 viscosity @ 25 °C Pot life2 @ 25 °C Colour Recommendations Parts by weight mPa s Minutes Gardner Water proofing B-47 | AH-713 100 : 50 3,500-4,500 110-130 Resin: 1 GS Curing agent: 9 GS Multipurpose water proofing system for good adhesion and sealing capability on concrete surfaces. B-47 | AH-714 100 : 50 500-700 140-180 Resin: 1 GS Curing agent: 8 GS Low viscosity water proofing system for good wetting and penetration in concrete and natural stones. B-47 | XH-80 100 : 67 1,500-2,500 60-80 Resin: 1 GS Curing agent: 15 GS Low temperature curing system for curing under high humidity and damp conditions that gives excellent adhesion to metal and concrete substrates. FRP rebars L-12 | K-918 | Accelerator* 100 : 85 600-900 5-12# Resin: 1 GS Curing agent: 2 GS Superior fibre impregnation with excellent thermal and mechanical properties in static and dynamic conditions. Clear casting-table top ARC-44 | AH-384 100 : 30 500-1,000 660-960 Resin: 1 GS Curing agent: 1 GS Long pot life system with low exotherm for glossy transparent casting. Suitable for decorative table top and decoupage applications. Coal tar ARB-28 | K-105 100 : 100 2,500-3,500 20-30 Resin: 1 GS Curing agent: Black Ambient curing system with high reactivity and good chemical resistance to mild acids and alkalis. Suitable for coatings in ETP, drainage pipes and sewerage lines. 1Brookfield viscosity | 2Pot life of 100g mixed mass | Note: *Use accelarator AC-14 | K-13 | AC-18 for different gel-time and Tg requirements | #Gel time at 120 °C with 1% accelerator Technical details l tails
RkJQdWJsaXNoZXIy MjA2MDI2