Epoxy primer system act as interface between concrete and screed. Atul offers systems that are VOC-free and have low odour, resulting in improved indoor air quality during application, meeting the highest standards for industrial floor coatings. Features • solvent and phthalate free • high penetration into concrete pores • excellent adhesion to concrete • good adhesion even to wet surfaces • cures at low temperature (upto 5 °C) • offers long working time • ready-to-use • USFDA, 21 CFR 175.300 compliant* • may be applied by brush | roller Applications • natural | kota stones, metal surfaces, old and new concrete Floor coating Primer systems 4 5 Application process Ensure surface is clean, dry and free from foreign contaminants. Fill hollow portions and cracks with mortar mixed with primer system. Mix primer system thoroughly as per the recommended ratio and apply on concrete surface. Allow to cure primer into semi-cure stage. Start application of mortar | screed when primer is slightly tacky. 1 3 2 4 Lapox systems Mixing ratio (resin : curing agent) Mixed1 viscosity @ 25 °C Pot life2 @ 25 °C Colour Recommendations Parts by weight mPa s Minutes Gardner Low viscosity ARB-32 | AH-714 100 : 50 400-600 140-160 Resin: 1 GS Curing agent: 8 GS Very low viscosity system for good wetting of non-porous substrates. B-47 | AH-714 100 : 50 500-700 140-180 Resin: 1 GS Curing agent: 8 GS Low viscosity system for general purpose applications. Medium viscosity ARB-32 | AH-713 100 : 50 3,000-4,000 120-140 Resin: 1 GS Curing agent: 9 GS Flexible system suitable for various substrates. Faster curing can be achieved by adding 3-5% of AC-14. B-47 | AH-713* 100 : 50 3,500-4,500 110-130 Resin: 1 GS Curing agent: 9 GS Recommended for multiple substrates. Faster curing can be achieved by adding 3-5% of AC-14. B-11 | AH-714 100 : 50 7,500-9,500 110-130 Resin: 1 GS Curing agent: 8 GS Suitable for high porosity concrete surface and provides high thickness of coatings. Primer for wet | damp surfaces ARB-32 | AH-747 100 : 60 450-650 50-70 Resin: 1 GS Curing agent: 12 GS Flexible system for application on metal and concrete surface. B-47 | AH-747 100 : 60 500-700 50-70 Resin: 1 GS Curing agent: 12 GS Fast curing system with excellent adhesion to wet | damp surfaces. B-47 | XH-80 100 : 67 1,500-2,500 60-80 Resin: 1 GS Curing agent: 15 GS Low temperature curing system. Cures under high humidity and damp conditions. 1Brookfield viscosity | 2Pot life of 100g mixed mass | Note: B-11 and AR-101 are Bis-A based liquid epoxy resins Technical details
RkJQdWJsaXNoZXIy MjA2MDI2