A thick layer of about 3-6 mm of mortar is laid on top of partially cured primer to achieve load bearing properties of flooring. Atul offers a wide range of mortar and screed systems for general purpose and heavy duty floorings. Features • solvent and phthlate free • high compressive strength • very low shrinkage • excellent adhesion to primed surface • excellent stability under static and dynamic load • offers long working time • may be applied by hand trowel | power trowel Applications • anti-skid flooring for parking lots, garages, walk-ways, warehouses and ramps 6 7 Application process Mix resin and curing agent thoroughly in specified ratio. Add quartz sand mix no.10 into resin mixture. Ensure that the primed surface is slightly tacky before application of mortar. Spread uniformly to achieve desired thickness by notch trowel. Level uniformly using hand | power trowel. Allow to cure for minimum 24 hrs to get optimum strength. 4 2 3 HARDNER RESIN 5 1 Floor coating Mortar and screed systems Lapox systems Mixing ratio (resin : curing agent) Mixed1 viscosity @ 25 °C Pot life2 @ 25 °C Colour Recommendations Parts by weight mPa s Minutes Gardner Mechanical strength B-47 | AH-713 100 : 50 3,500-4,500 110-130 Resin: 1 GS Curing agent: 9 GS Standard system for screed lining. B-11 | AH-714 100 : 50 7,500-9,500 110-130 Resin: 1 GS Curing agent: 8 GS System with high mechanical strength for load bearing applications. Chemical resistance ARPN-58 | AH-351 100 : 30 5,000-8,000 25-35 Resin: 3 GS Curing agent: 4 GS Epoxy phenol novolac (EPN) system with excellent chemical resistance to concentrated acids and alkalis. Able to withstand 98% sulphuric acid. ARPN-58 | K-41 | K-42 100 : 65 12,000-16,000 65-85 Resin: 3 GS Curing agent: >18 GS EPN system with excellent chemical resistance to concentrated acids and alkalis. ARPN-58 | K-49 100 : 65 8,000-10,000 100-130 Resin: 3 GS Curing agent: 13 GS Low viscosity EPN system with excellent chemical resistance to concentrated acids and alkalis. Enables higher filler loading. B-47 | K-41 | K-42* 100 : 60 1,000-7,000 150-300 Resin: 1 GS Curing agent: >18 GS Low viscosity system for excellent chemical resistant tank lining and screeds. B-11 | K-41 | K-42* 100 : 60 8,000-15,000 50-140 Resin: 1 GS Curing agent: >18 GS Standard system for excellent chemical resistant tank lining and screeds. B-11 | K-49 100 : 60 7,000-10,000 110-150 Resin: 1 GS Curing agent: 13 GS Standard low viscosity system for good chemical resistant tank lining and screeds. 1Brookfield viscosity | 2Pot life of 100g mixed mass | Note: B-11 and AR-101 are Bis-A based liquid epoxy resins | Use ARPN-59 in place of ARPN-58 for low mixed viscosity | *Combination of two curing agents in specified ratio provides flexibility in working time Technical details
RkJQdWJsaXNoZXIy MjA2MDI2